Arctic Cat Pro Climb Series

Diamond S Mesh Hoods

• Windshield and Gauge Pro climb hoods are built to accept the stock instrument/windshield bracket and easily let you mount your stock windshield and gauge.
  

• Weight save up to 13 pounds.
  

• Nose-cone/Airbox the nose-cone is a separate piece from the hood that mounts directly to the snowmobile.  The hood mounts to the nose-cone and side panels similar to the M series hoods.
  

• Air Intake Nose-cone can be fitted with frogs skins and an air dam to eliminate drawing hot air from under the hood into the air intake.
  

• Shipping Pro climb hoods can be shipped UPS.
  

$550 plus shipping

Arctic Cat M-Series

Diamond S Mesh Hoods

• Air Intake is a vacuum formed section that runs down the center of the hood. Hoods with an air intake require a strip of material down the center of the hood to form the top portion of the air duct.
  

• Weight save up to 18 pounds.
  

• Turbo Hoods are preferred by turbo owners. It is an all mesh hood that allows maximum airflow under the hood.
  

• Instrument Pod holds the stock gauge.
  

• Shipping M-series hoods can ship Greyhound or truck freight.
  

$490 plus shipping   Optional Air intake $55 US

Polaris Pro-RMK

Diamond S Mesh Hoods

• Mounting hoods mount in all stock locations using stock screws and Zeus clips.
  

• Weight  save up to 11 pounds.
  

• Intake the airbox on the Pro-RMK sits about 2 inches below the hood and have found with previous hoods it works best to leave it open.
  

• Instrument Pod holds the stock gauge and key switch.
  

• Shipping Pro-RMK hoods ship UPS.
  

$425 plus shipping

Polaris IQ

Diamond S Mesh Hoods

      

• Mounting the IQ hood mounts to the stock hinges using the stock straps on the back.
  

• Weight save up to 16 pounds.
  

• Intake the airbox on the IQ sits slightly under the mesh we have found that to leave it open will draw better than mounting it tight against the hood.
  

• Shipping either Greyhound or truck freight.
  

$490 plus shipping

Polaris Edge

Diamond S Mesh Hoods

• Intake the airbox on the Edge hood sits slightly under the mesh, we have found that leaving it open draws better than mounting it tight against the hood.
  

• Weight save up to 18 pounds.
  

• Mounting the edge hood requires two rubber bungees in the front as well as the stock bungees in the back.
  

• Shipping either Greyhound or truck freight.
  

$490 plus shipping

Yamaha Nytro/Nypex

Diamond S Mesh Hoods

• Mounting Nytro hoods mount using the to stock Zeus clips in the back and two bungees up front.
  

• Shipping Nytro hoods can be shipped UPS.
  

$425 plus shipping

Yamaha Apex

Diamond S Mesh Hood

• Mounting apex hood requires two rubber bungees on the back and two up front.
  

• Weight save up to 10 pounds
  

• Shipping apex hoods can be shipped UPS
  

$425 plus shipping

Instrument Pods

• Arctic Cat M-Series
  

• Pro-RMK
  

• Polaris IQ
  

• Polaris Edge
  

• Yamaha Apex
  

$55 plus shipping

The mesh hoods let heat out and fresh air in while saving weight. Our hoods are designed to provide maximum airflow to your motor compartment while keeping snow out. Hoods are fabricated with aircraft aluminum and a tubular frame design, and covered with high quality air mesh. Hoods can be equipped with instrument pods and light brackets.

Hoods

email: diamonds@mail.manti.com | call: (435) 283-4535